The DustDroid™ 130 is designed for capturing the extra fine dust
created by cutting, drilling, grinding and sanding materials such as
concrete, masonry, stone, fiberglass and other construction materials.
It produces 130 CFM and features a 16 gallon canister that is easily
removed for emptying. Contractors like how the unit is price
considerably lower than competitive HEPA vacuums and is powered by 120
volt current. This workhorse vacuum has fewer moving parts, and no
solenoids, to require less maintenance and provide more reliable
performance.
Longer HEPA filter life
The HEPA filter’s life is greatly extended because of two
pre-filters – both capture particles as small as .5 microns, leaving
only the smallest of particles for the HEPA filter. The WonderBag™ micro
pre-filter is a canister bag that holds up to 40 lbs of dust. It is
intentionally oversized so at least 50% of its surface area is always
available to support airflow. The WunderBag™ also helps expedite the
double bagging process required when performing lead abatement work that
has to meet EPA RRP requirements. The system also features a HEPA
filter cover that also captures particles down to .5 micron.
The truth about pulse cleaning
Pulse cleaning every 15 seconds is hard on HEPA filters.
Violent bursts of air explode - thrusting abrasive granules against the
delicate filter material, damaging the microscopic fibers and shortening
the HEPA filter’s life. DustDroid™ vacuums are much kinder to your HEPA
filters.
Why the DustDroid™ requires less maintenance
The moving parts associated with automated pulse-cleaning
systems (solenoids) are subject to frequent breakdowns. DustDroid™
vacuums have no solenoids - only mechanical switches - proven to be
reliable when exposed to constant vibration, dust and other harsh
conditions.
Features:
- Save money by extending the life of your HEPA filter with WunderBag™ micro pre-filters
- Capture 99% of dust BEFORE it reaches the HEPA filter
- Transport with ease – separate components are light weight
- Meet government standards (EPA RRP) with certified HEPA filters
- Reduce maintenance - NO solenoids!
Voltage: 120v 60hz
Amperage: 10.6 amps
Water lift: 76.9 in
CFM: 126.39
Filtration: Certified HEPA rated 99.97% @ .3 micron, with WunderBag™
micro pre-filter rated at .5 micron, and HEPA filter cover rated at .5
micron
Standard accessories (2 wands, crevice tool, floor tool, Wunderbag™, 12 foot hose)
Capacity – 16 gallon
