#H0062 DUSTPRO 600 - for WOOD FLOORSThe DustPro™ 600 is designed for capturing saw dust from wood flooring applications. It produces 600 CFM and features a 50 gallon canister that is easily removed for emptying. Contractors like how the unit is price considerably lower than competitive HEPA vacuums and the AirBender™ technology enables them to go up to 10 times longer between filter cleanings. This workhorse vacuum has fewer moving parts, and no solenoids, to require less maintenance and provide more reliable performance.
The DustPro 600 comes standard with hose: 3"x 25’. It has enough power to run efficiently up to 125’ from the vacuum. It has capacity to sand 1000-1200 sq ft before removing the plastic collection bag, and comes standard with plug for your belt machine so you only need one power cord from the 240 volt power source. This system, although set up for 1 belt machine and 2 edgers, can be also used with a gym floor rider, collecting dust from two 12” drum machines run at full speed.
DustPro™ 600 delivers far greater productivityThe best way to get high productivity out of any HEPA vacuum is to keep the filter clean. That doesn’t mean pulsing every 15 seconds to blow dust off the pleats. It means keeping dust away from the HEPA filter to begin with. That is the way the DustPro™600 HEPA Vacuum, with Air-Bender™ technology, increases productivity.
The truth about pulse cleaningPulse cleaning every 15 seconds is hard on HEPA filters. Violent bursts of air explode - thrusting abrasive granules against the delicate filter material, damaging the microscopic fibers and shortening the HEPA filter’s life. DustPro™ vacuums are much kinder to your HEPA filters, requiring pulsing 1, instead of, 240 times each hour.
Why the DustPro™ requires less maintenanceThe moving parts associated with automated pulse-cleaning systems (solenoids) are subject to frequent breakdowns. DustPro™ vacuums have no solenoids - only mechanical switches - proven to be reliable when exposed to constant vibration, dust and other harsh conditions.
How the DustPro™ extends cleaning intervals 10 times longerAir-Bender™ technology greatly increases cleaning intervals by doing a superior job of capturing dust BEFORE it reaches the HEPA filter. The Air-Bender™ cyclone captures 99% of airborne dust compared to typical cyclones, which capture only 80%.
How Air-Bender™ technology worksThe Air-Bender™ cyclonic system “bends” the air stream at the bottom of the canister, and allows 98% of the dust to settle in a large Passive Air Zone before the air moves on to the HEPA filter canister. By allowing only 2%, instead of 20%, of the dust to reach the HEPA filter, Air-Bender™ technology enables contractors to go 10 times longer between cleaning intervals.
